United States  [change]    
Support
Support Technique
Base de Connaisssances
Telecharger les drivers
Politique de garantie produit



KB Questions
When I run the PLC Configuration Utility I detect more PowerLine devices than I have. Why is this?
Do your powerline devices handle power surges?
What operating systems are compatible with powerline devices?
What are some companies that support HomePlug standards?
If I have older wiring in my home, will I experience a difference in performance?
Are powerline devices thoroughly tested?
Can I share my network connection with a neighbor?
Are Powerline devices secure?
Is Powerline a proprietary networking standard?
How do I provide Internet access to computers connected to powerline devices?
How can I get high-speed Internet access through Powerline devices?
What can I do with Powerline devices?
What are the benefits of using Powerline networking products?
How does a Powerline device communicate with other powerline devices?
What is a Powerline Network?
Can my neighbors access my network if they also have powerline devices?
How can I access the units again if I forget the password?
What is the maximum distance that can be achieved with the TPL-101U and TPL-102E?
Can I connect my TPL-101U or TPL-102E to a surge protector or UPS?
All my powerline devices share the same network password, but I cannot connect to the Internet. What should I do?
I can detect my powerline devices on my powerline network, but I cannot connect to the Internet. What should I do?
I have verified that my powerline device is properly connected to my workstation/router but I cannot detect other powerline devices. What should I do?
I completed all the steps in the quick installation guide, but my powerline adapter isn’t connecting to any of my powerline devices. What should I do?
Search:
Browse:
  Enter KB ID#:
Knowledgebase Home Page > Powerline > TPL-101U
I can detect my powerline devices on my powerline network, but I cannot connect to the Internet. What should I do?

Make sure that all powerline devices share the same network password. Open the PLC Configuration Utility and click the Security tab. Click Restore Default to use the default password. Go to each powerline device, open the PLC Configuration Utility, and click Restore Default for each Powerline device.

Knowledgebase ID
578
Created: 10/26/2005
Modified: 10/26/2005
Attachments
No attachments were found.

Would you like to...
Print this page
Email this to a friend
Post a comment
Rate this KB

(1.0)
Was this answer helpful:
(5 = very helpful.
0 = not helpful at all)
5 4 3 2 1
Page d'accueil | Présentation de l’entreprise | Produits | Où Acheter | Nouveautés et Informations | Support | Téléchargement | Partenaires | TRENDnetTV
© Copyright 2013 TRENDnet Tous droits reserves. Nous Contacter | Confidentialité   Connectez-vous à: Facebook Twitter You Tube
Share