Login to My Account   Partners  
Click to change countryUnited Kingdom (change)

N300 Wireless VPN Router

TEW-659BRV (Version v1.0R)
  • Define up to 80 Virtual Private Network tunnels
  • IPSec, L2TP, and PPTP VPN pass-through support
  • 300Mbps Wireless N
  • One-touch WPS wireless connection

The TEW-659BRV (Version v1.0R) has been discontinued.  For a list of discontinued products, click here.
Standards IEEE 802.3 (10BASE-T), IEEE 802.3u (100BASE-TX), IEEE 802.11b/g/n
WAN 1 x 10/100Mbps Auto-MDIX port (Internet)
LAN 4 x 10/100Mbps Auto-MDIX ports
Power Switch On/Off power switch
WPS/Reset Button Wi-Fi Protected Setup (WPS) - Automated wireless connection push button (Hold for 3 seconds)
Reset button - Factory Default (Hold for 20 seconds)
Connection Type Dynamic IP, Static (fixed) IP, PPPoE, PPTP, L2TP
Firewall NAT, SPI, and DoS prevention
VPN IPsec/PPTP/L2TP– Up to 80* tunnels
PPTP/L2TP Server and Client – Define up to 5 user accounts each (multiple logins per account)
IPsec/L2TP/PPTP VPN pass through – Up to 100 sessions
GRE – Up to 8 tunnels
IPsec VPN Protocols Encryption (DES, 3DES, AES-128/192/256 bit), Authentication (MD5, SHA1), DH/PFS Groups (1-18), Key Management (Manual/IKE), Preshared Key (PSK), Encapsulation (ESP, AH, ESP+AH), Mode (Main/Aggressive), NAT Traversal, NetBIOS over IPsec, XAUTH, Keep-Alive, Dead Peer Detection (DPD), Local/Remote ID (FQDN, E-Mail, Key ID)
PPTP/L2TP VPN Protocols Authentication (PAP, CHAP, MS-CHAP v1/2), Encryption (MPPE-40/56/128 bit)
Access Control Virtual Servers, Packet MAC/IP Packet Filters, URL/Keyword Filters, DMZ host, One-to-One NAT, UPnP, and IGMPv1/2 pass through
Time/Schedule Set time via NTP or manually and define schedules: wireless, virtual server, packet filters, and QoS
Routing Static and Dynamic RIP v1/2
Quality of Service Service-Based IP/(TCP/UDP) port with 3 priority queues (High, Normal, Low), and WMM
Management/ Monitoring Local/remote configuration, upgrade firmware, Backup/Restore configuration via Web browser
Internal System Log, Syslog, E-Mail Alert, SNMPv1/v2c, Ping Test Tool, and Wake-on-LAN (WoL)
LED Indicator Status, LAN1~LAN4, WAN (Internet), WLAN/WPS
  • Input: 100~240V AC, 50~60Hz
  • Output: 12V DC, 1A
Power Consumption 5.4 Watts (max.)
(L x W x H)
189 x 118 x 33 mm (7.4 x 4.6 x 1.3 in)
Weight 272 g (9.6 oz)
  • Operation: 0°~ 40°C (32°F~ 104°F)
  • Storage: -10°~ 90°C (14°F~158 °F)
Humidity Max. 95% (non-condensing)
Certifications CE, FCC
Frequency 2.412 ~ 2.472 GHz
Access Point Modes Access Point (AP) and Wireless Distribution System (WDS)
SSID Broadcast up to 4 SSIDs each with different wireless security
Security 64/128-Bit WEP (HEX & ASCII), WPA/WPA2 RADIUS, WPA/WPA2-PSK
Antenna 2 x 2 dBi fixed antennas
Data Rate
  • 802.11b: up to 11Mbps
  • 802.11g: up to 54Mbps
  • 802.11n: up to 300Mbps**
Output Power
  • 802.11b: 17dBm (typical)
  • 802.11g: 14dBm (typical)
  • 802.11n: 12dBm (typical)
Receiving Sensitivity
  • 802.11b: -84dBm (typical) @ 11Mbps
  • 802.11g: -72dBm (typical) @ 54Mbps
  • 802.11n: -66dBm (typical) @ 300Mbps
Channels 1~ 11 (FCC), 1~13 (ETSI)

Package Contents

  • TEW-659BRV
  • Multi-Language Quick Installation Guide
  • CD-ROM (User’s Guide)
  • Network cable (1.5m / 5ft)
  • Power adapter (12V DC, 1A)