DO NOT upgrade firmware on any TRENDnet product using wireless connection. Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only |
Firmware Version: 1.1.12
Release Date: 11/2017
Note:
- Fixed WPA2 KRACK security vulnerabilities.
Filename: FW_TEW-738APBO_v1(1.1.12).zip
SHA-1 Checksum: B4DB7CA740AD0B80E1C74645E649B7E6A5CDC418
Date
11/17/2017
File Size
5.47 MB
Filename: EN_spec_TEW-738APBO(v1.0R).pdf
Date
3/17/2015
File Size
628.29 KB
Filename: FR_spec_TEW-738APBO(v1.0R).pdf
Date
3/17/2015
File Size
636.73 KB
Filename: GE_spec_TEW-738APBO(v1.0R).pdf
Date
3/17/2015
File Size
635.50 KB
Filename: PO_spec_TEW-738APBO(v1.0R).pdf
Date
3/17/2015
File Size
639.56 KB
Filename: SP_spec_TEW-738APBO(v1.0R).pdf
Date
3/17/2015
File Size
634.18 KB
Filename: RU_spec_TEW-738APBO(v1.0R).pdf
Date
3/17/2015
File Size
633.99 KB
Filename: IT_spec_TEW-738APBO(v1.0R).pdf
Date
3/17/2015
File Size
635.50 KB
Filename: EN_Web_TEW-738APBO(V1.0R).pdf
Date
7/9/2014
File Size
2.91 MB
Filename: FR_Web_TEW-738APBO(V1.0R).pdf
Date
7/9/2014
File Size
3.00 MB
Filename: GE_Web_TEW-738APBO(V1.0R).pdf
Date
7/9/2014
File Size
2.15 MB
Filename: PO_Web_TEW-738APBO(V1.0R).pdf
Date
7/9/2014
File Size
1.79 MB
Filename: SP_Web_TEW-738APBO(V1.0R).pdf
Date
7/9/2014
File Size
2.14 MB
Filename: RU_Web_TEW-738APBO(V1.0R).pdf
Date
7/9/2014
File Size
3.60 MB
Filename: EST_Web_TEW-738APBO(V1.0R).pdf
Date
7/9/2014
File Size
1.80 MB
Filename: POL_Web_TEW-738APBO(V1.0R).pdf
Date
7/9/2014
File Size
3.60 MB
Filename: RO_Web_TEW-738APBO(V1.0R).pdf
Date
7/9/2014
File Size
3.68 MB
Filename: NL_Web_TEW-738APBO(V1.0R).pdf
Date
7/9/2014
File Size
2.09 MB
Filename: HU_Web_TEW-738APBO(V1.0R).pdf
Date
7/9/2014
File Size
3.71 MB
Filename: BUL_Web_TEW-738APBO(V1.0R).pdf
Date
7/9/2014
File Size
3.59 MB
Filename: UG_TEW-738APBO(v1.0R).pdf
Date
10/8/2014
File Size
2.37 MB
JPEG Image
File Size: 257.02 KB
Date: 7/9/2014
Download
JPEG Image
File Size: 324.42 KB
Date: 7/9/2014
Download
JPEG Image
File Size: 440.61 KB
Date: 6/25/2015
Download
Press and hold in the reset button for approximately 15 seconds while the power is on.
The default values are as follows.
IP Address: 192.168.10.100
Username: admin
Password: admin
SSID: TRENDnet7380_2.4GHz
Encryption: none
...
Log in to the TEW-738APBO by entering https://192.168.10.100 into the address line of your browser.
The default Username and Password are both admin.
...
Log in to the TEW-738APBO by entering https://192.168.10.100 into the address line of your browser.
The default Username and Password are both admin.
Click System > Operation Mode and make sure that Operation Mode is set to WDS Mode then click Save & Reboot.
Click Wireles...
Log in to the TEW-738APBO by entering https://192.168.10.100 into the address line of your browser.
The default Username and Password are both admin.
Click on Wireless > Virtual AP and click VAP Edit on your profile.
Click the Security Type drop down menu and select th...
Yes, the TEW-738APBO supports SNMP v1, v2c and v3. Also supports SNMP Trap.
The TEW-738APBO supports up to 20 entries.
The TEW-738APBO is not an 802.3af compliant device. It uses a proprietary Power over Ethernet adapter. You must use the PoE injector that comes with the TEW-738APBO. ...
Standards | - IEEE 802.3
- IEEE 802.3u
- IEEE 802.1d
- IEEE 802.1p
- IEEE 802.1Q
- IEEE 802.1X
- IEEE 802.11d
- IEEE 802.11e
- IEEE 802.11f
- IEEE 802.11h
- IEEE 802.11i
- IEEE 802.11b
- IEEE 802.11g
- IEEE 802.11n (2.4GHz up to 300 Mbps)
|
Hardware Interface | - 1 x 10/100 Mbps (proprietary PoE) port**
- Reset button
- LED indicators
|
Special Features | - IP67 weather rated
- 802.1Q VLAN assignment per SSID
- DDNS support for dyn.com, dhs.org, osd, tzo.com
- Schedule radio on/off time policy
|
Access Control | - Wireless encryption: WEP, WPA/WPA2-PSK, WPA/WPA2-RADIUS
- Firewall (CPE Mode): NAT, Virtual Server, DMZ Host, PPTP/L2TP/IPsec VPN Passthrough
- Access Controls: MAC, IP Filter, Layer 2 Client Isolation, Per-SSID client limiting
- 802.1Q VLAN
|
QoS | - WMM
- Diffserv (DSCP)/ToS
- 802.1p/CoS
|
Operation Modes | - Access Point (AP)/WDS+AP
- Wireless Distribution System (WDS)
- Repeater
- CPE + AP (WISP)
|
SSID | |
Internet Connection Types (CPE mode) | - Dynamic IP (DHCP)
- Static IP (Fixed)
- PPPoE (Dynamic IP/Static IP)
- PPTP (Dynamic IP/Static IP)
|
Management/Monitoring | - Local/remote web based management (HTTP, HTTPS)
- Local/remote CLI based management (Telnet, SSH)
- SNMP v1/v2c/v3
- SNMP Trap
- MIB II
- Upgrade firmware
- Backup/restore configuration
- Event logging
- Reboot
- Restore to factory defaults
- Ping test
- Ping Watchdog
|
Routing | - Static
- Dynamic (RIP v1/2, OSPF)
|
Frequency | - FCC: 2.412 - 2.462 GHz
- ETSI: 2.412 – 2.472 GHz
|
Wireless Channels | |
Modulation | - 802.11b: DBPK, DQPSK, CCK with DSSS
- 802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM with OFDM
|
Media Access Protocol | |
Antenna Gain | - 10 dBi internal sector antenna
|
Wireless Output Power/Receiving Sensitivity | - 802.11b: FCC/ETSI: FCC: 28 dBm (max.), ETSI: 10.6 dBm (max.)/-88 dBm (typical) @ 11 Mbps
- 802.11g: FCC/ETSI: FCC: 27 dBm (max.), ETSI: 10.7 dBm (max.)/- 74 dBm (typical) @ 54 Mbps
- 802.11n: FCC/ETSI: FCC: 28 dBm (max.), ETSI: 10.7 dBm (max.)/- 69 dBm (typical) @ 300 Mbps
|
EIRP | - FCC: up to 38 dBm (with built in 10 dBi antenna)
- ETSI: up to 20 dBm (with built in 10 dBi antenna)
|
Power | - Input: 100 – 220 V, 50 - 60 Hz, 0.6 A
- Output: 48 V, 0.5 A
- Consumption: 22 Watts max.
|
Operating Temperature | - -30 - 60° C (-22 - 140° F)
|
Operating Humidity | |
Certifications | |
Dimensions | - 215 x 122 x 66 mm (8.5 x 4.8 x 2.6 in.) (not including mounting bracket)
|
Weight | |
Warranty | |
PACKAGE CONTENTS |
- TEW-738APBO
- CD-ROM (User's Guide)
- Multi-Language Quick Installation Guide
- Mounting hardware
- Proprietary PoE injector
- Water-proof RJ-45 plug (Network cable not included)
- Power adapter (48V, 0.5A)
|
* Effective wireless coverage may vary depending on the wireless device's output power, antenna gain, antenna alignment, receiving sensitivity, and radio interference. Additionally environmental factors such as weather conditions, physical obstacles, and other considerations may affect performance. For optimal results, we recommended consulting a professional installer for site survey, safety precautions, and proper installation.
** Recommended max. PoE cable length of 70 m.
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.