Test Pin Configuration | - RJ45 EIA, TIA-568A/568B, and crossover cables
- RJ9, RJ11, RJ12, RJ14, RJ25, RJ45, and RJ61
- USOC 2, 4, 6, and 8
- Coax Video-BNC and CATV-F
- USB 3.0, USB 2.0
|
Transmitter Unit Interface | - 1 x RJ port
- 1 x USB 3.0/2.0 Type-A port
- 1 x USB 3.0/2.0 Type-B port
- Test button
- Mode button
- On/off button
- LED indicators
- Battery compartment
- Receiver unit attachment port
|
Remote Unit Interface | - 1 x RJ port
- 1 x USB 3.0/2.0 Type-A port
|
Compatible Cables* | - Cat 8, 7, 6, 6e, 6a, 5, 5e, 4, 3, 3e
- Coax Video-BNC and CATV-F cable (with included RJ45 to F adapters)
- RJ9, RJ11, RJ12, RJ14, RJ25, and RJ61 cables
- USOC 2, 4, 6, and 8
- USB 3.0 A to B
- USB 2.0 A to B
|
Tone Frequency | |
Special Features | - Tests grounding of shielded (screened) cables
- Identifies proper, severed, short circuit, and cross connected pins
- Continuous scan mode is design to accommodate testing with cable ends in different locations
- Manual scan is well suited for loop back cable testing
- Designed to quickly test large cable quantities, Quick Test Mode identifies a given cable type and then immediately issues a Pass/Fail for the same cable type
- Blinking Hub/Switch Mode identifies connected hub/switch port
- Compatible with TRENDnet's TC-TP1, Network Probe, to trace cables using two selectable tones
- Tests cables lengths of up to 300 meters (1,000 ft.)
|
Power Source | - Transmitter: 9 V DC battery (not included)
- Remote unit: No power needed
|
Operating Temperature | |
Operating Humidity | |
Certifications | |
Dimensions | - Transmitter: 117 x 67 x 27 mm (4.6 x 2.6 x 1.1 in.)
- Remote unit: 57 x 30 x 27 mm (2.2 x 1.2 x 1.1 in.)
|
Weight | - Transmitter: 144 g (5.1 oz.)
- Remote unit: 26 g (0.9 oz.)
|
Warranty | |