Login to My Account   Partners  
Click to change countryUnited Kingdom (change)
 

VDV & USB Cable Tester (Certified Refurbished)

RB-TC-NT3 (Version v1.0R)
  • Comprehensive cable tester for network professionals
  • Tests voice, data, video, and USB cables
  • Accurately test pin configurations for cable lengths up to 300 meters (1,000 ft.)
  • Identifies severed, short circuit, and cross connected pins
  • Quick pass/fail for large test quantities
  • Blinking Hub/Switch Mode identifies connected hub/switch port
  • Convenient travel case

  • Test Pin Configuration
  • RJ45 EIA, TIA-568A/568B, and crossover cables
  • RJ9, RJ11, RJ12, RJ14, RJ25, RJ45, and RJ61
  • USOC 2, 4, 6, and 8
  • Coax Video-BNC and CATV-F
  • USB 3.0, USB 2.0
  • Transmitter Unit Interface
  • 1 x RJ port
  • 1 x USB 3.0/2.0 Type-A port
  • 1 x USB 3.0/2.0 Type-B port
  • Test button
  • Mode button
  • On/off button
  • LED indicators
  • Battery compartment
  • Receiver unit attachment port
  • Remote Unit Interface
  • 1 x RJ port
  • 1 x USB 3.0/2.0 Type-A port
  • Compatible Cables*
  • Cat 8, 7, 6, 6e, 6a, 5, 5e, 4, 3, 3e
  • Coax Video-BNC and CATV-F cable (with included RJ45 to F adapters)
  • RJ9, RJ11, RJ12, RJ14, RJ25, and RJ61 cables
  • USOC 2, 4, 6, and 8
  • USB 3.0 A to B
  • USB 2.0 A to B
  • Tone Frequency
  • 600 – 1,000 Hz
  • Special Features
  • Tests grounding of shielded (screened) cables
  • Identifies proper, severed, short circuit, and cross connected pins
  • Continuous scan mode is design to accommodate testing with cable ends in different locations
  • Manual scan is well suited for loop back cable testing
  • Designed to quickly test large cable quantities, Quick Test Mode identifies a given cable type and then immediately issues a Pass/Fail for the same cable type
  • Blinking Hub/Switch Mode identifies connected hub/switch port
  • Compatible with TRENDnet’s TC-TP1, Network Probe, to trace cables using two selectable tones
  • Tests cables lengths of up to 300 meters (1,000 ft.)
  • Power Source
  • Transmitter: 9 V DC battery (not included)
  • Remote unit: No power needed
  • Operating Temperature
  • 0 - 50 °C (32 - 122 °F)
  • Operating Humidity
  • Max. 95% non-condensing
  • Certifications
  • CE
  • Dimensions
  • Transmitter: 117 x 67 x 27 mm (4.6 x 2.6 x 1.1 in.)
  • Remote unit: 57 x 30 x 27 mm (2.2 x 1.2 x 1.1 in.)
  • Weight
  • Transmitter: 144 g (5.1 oz.)
  • Remote unit: 26 g (0.9 oz.)
  • Warranty
  • 90-day limited
 

Package Contents

  • TC-NT3
  • Quick Installation Guide
  • 2 x RJ45-to-F adapter
  • Network patch cable (15 cm/6 in.)
  • Carry pouch
 
*Not designed for live wires. Connecting tester to a live telephone wire may damage the tester.