Login to My Account   Partners  
Click to change countryUnited States (change)
 

12-Port Hardened Industrial Gigabit PoE+ Layer 2+ Managed DIN-Rail Switch

TI-PG1284i (Version v1.0R)
  • Hardened IP30 rated metal enclosure with integrated DIN-Rail mount
  • Wide operating temperature range - 40 to 75 °C (-40 to 167 °F)
  • 8 x Gigabit PoE+ (802.3at) ports, 4 x Gigabit SFP slots, and 1 x console port
  • 240 Watts total power budget
  • Dual redundant power inputs and alarm relay output
  • CLI (Console / Telnet / SSH), Web (HTTP / HTTPS), SNMP v1 / 2c / 3 management
  • 802.1Q / Q-in-Q VLAN and IGMP Snooping / MLD / MVR support
  • 802.1p / DSCP / Queue Scheduling (SPQ / WRR) QoS support
  • Power supply sold separately (model: TI-S24048)

  • Standards
  • IEEE 802.1d
  • IEEE 802.1p
  • IEEE 802.1Q
  • IEEE 802.1s
  • IEEE 802.1w
  • IEEE 802.1X
  • IEEE 802.1ab
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.3x
  • IEEE 802.3z
  • IEEE 802.3ab
  • IEEE 802.3ad
  • IEEE 802.3af
  • IEEE 802.3at
  • Device Interface
  • 8 x Gigabit PoE+ ports
  • 4 x Gigabit SFP slots
  • 1 x Console port (RJ-45)
  • 6-pin removable terminal block (Primary / RPS power inputs & alarm relay output)
  • DIP switch (Alarm for primary / RPS power and ports / slots failure)
  • LED indicators
  • Data Transfer Rate
  • Ethernet: 10 Mbps (half-duplex), 20 Mbps (full-duplex)
  • Fast Ethernet: 100 Mbps (half-duplex), 200 Mbps (full-duplex)
  • Gigabit Ethernet: 2000 Mbps (full-duplex)
  • SX / LX: 2000 Mbps (full-duplex)
  • Performance
  • Switch fabric: 24 Gbps
  • RAM buffer: 128 MB
  • MAC address table: 16 K entries
  • Jumbo frames: 10 KB
  • Forwarding rate: 17.86 Mpps (64-byte packet size)
  • Management
  • CLI (Console, Telnet, SSH)
  • HTTP / HTTPS (SSL) web based GUI
  • SNMP v1, v2c, 3
  • SNMP trap
  • RMON groups 1, 2, 3, 9
  • LLDP
  • SNTP
  • SMTP alert
  • Syslog
  • Port statistics / utilization
  • Traffic monitor
  • Port mirror (Ingress, Egress, Both)
  • Storm control (Multicast, DLF, Broadcast)
  • Modbus / TCP
  • IPv6 static IP address, DHCPv6 client
  • Dual Image
  • Auto Provision via FTP / TFTP / HTTP Server
  • Xpress Ring
  • ERPS (Ethernet Ring Protection Switching) G8032v2
  • SFP DDMI (Digital Diagnostic Monitoring Interface)
  • MIB
  • MIB II RFC 1213
  • Bridge MIB RFC 1493
  • Ethernet Interface MIB RFC 1643
  • RMON MIB RFC 1757
  • Spanning Tree
  • STP (Spanning Tree protocol)
  • RSTP (Rapid Spanning Tree protocol)
  • MSTP (Multiple Spanning Tree protocol)
  • Link Aggregation
  • Static link aggregation
  • 802.3ad dynamic LACP
  • Up to 6 link aggregation groups
  • Quality of Service (QoS)
  • 802.1p Class of Service (CoS)
  • DSCP (Differentiated Services Code Point)
  • Bandwidth control per port
  • Queue Scheduling: Strict Priority (SP), Weighted Round Robin (WRR)
  • VLAN
  • 802.1Q tagged VLAN
  • MAC-based VLAN
  • Dynamic GVRP
  • Protocol-based (Ethernet II, Non-LLC-SNAP, LLC-SNAP)
  • Q-in-Q VLAN stacking / double VLAN (port-based, selective)
  • Port isolation
  • Up to 256 VLAN groups, ID range 1-4094
  • Multicast
  • IGMP snooping v1, v2, v3
  • MVR
  • MLD v1, v2
  • IGMP filtering / querier / proxy
  • Static multicast address
  • Up to 256 multicast entries
  • Access Control
  • 802.1X port-based network access control RADIUS
  • Local dial-in user authentication
  • DHCP snooping / screening
  • Loopback detection
  • ARP inspection
  • IP Source Guard
  • IP-MAC-Port binding
  • Trusted host
  • MAC address learning
  • ACL IPv4
  • MAC Address
  • VLAN ID
  • Ethernet Type
  • IP Protocol 0-255
  • TCP / UDP Port 1-65535
  • DSCP
  • Layer 3 Features
  • IPv4 / IPv6 static routing
  • IPv4 / IPv6 proxy ARP
  • IP interfaces: Up to 16
  • Routing table entries: Up to 500 (IPv4: 400 / IPv6: 100)
  • DHCP Server / Relay / Option 82
  • Special Features
  • CLI & web based management
  • Full power PoE+
  • Wide operating temperature range
  • Dual redundant power inputs
  • Alarm relay triggered by power and ports / slots failure
  • Surge / ESD protection
  • L2+ management features
  • Power
  • PWR (Primary) terminal input: 48 – 57 V DC (TI-S24048 sold separately)
  • RPS (Redundant) terminal input: 48 – 57 V DC (TI-S24048 sold separately)
  • Consumption: 18 W (max.), 260 W (max.) with PoE+ fully loaded
  • Optional Power Supply (TI-S24048 sold separately)
  • Input: 100-240 V AC, 50 / 60 Hz, 1.8 A 125-370 V DC
  • Output: 240 Watts, 48 V, 5 A
  • DIN-rail: TS-35 / 7.5 or 15
  • Operating Temperature: - 25 to 70 °C (- 13 to 158 °F)
  • PoE
  • PoE budget: 240 W
  • Up to 15 W per port for PoE
  • Up to 30 W per port for PoE+
  • Mode A: Pins 1, 2 (V+) and pins 3, 6 (V-)
  • PoE enable / disable per port setting, priority, scheduling, power delay, and PD alive check
  • Enclosure
  • IP30 rated metal enclosure
  • DIN-Rail mount
  • Grounding point
  • ESD (Ethernet) Protection: 8 KV DC
  • Surge (Power) Protection: 6 KV DC
  • MTBF
  • 99,992 hrs @ 75 °C
  • 322,805 hrs @ 25 °C
  • Operating Temperature
  • - 40 to 75 °C (-40 to 167 °F)
  • Operating Humidity
  • Max. 95% non-condensing
  • Dimensions
  • 170 x 132 x 50 mm (6.69 x 5.2 x 1.97 in.)
  • Weight
  • 920 g (2.03 lbs.)
  • Certifications
  • CE
  • FCC
  • Shock (IEC 60068-2-27)
  • Freefall (IEC 60068-2-32)
  • Vibration (IEC 60068-2-6)
  • Warranty
  • 3 year limited
 

Package Contents

  • TI-PG1284i
  • Quick Installation Guide
  • CD-ROM (User’s Guide)
  • Console cable (RJ-45 to RS-232)