DO NOT upgrade firmware on any TRENDnet product using wireless connection. Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only |
Firmware Version: 1.02
Release Date: 03/2012
Note: Initial Release
Note:
*Never upgrade firmware via a wireless connection
**After successfully upgraded the firmware, please reset the unit to factory default
***Please refer to the Firmware Upgrade Procedure.pdf in .zip file for instruct
Filename: TEW-676APBOv1(FW1.02).zip
SHA-1 Checksum: 8199207C982B639690D54200703A9B8959867E21
Date
7/25/2017
File Size
3.56 MB
Filename: EN_spec_TEW-676APBO(v1.0R).pdf
Date
8/29/2012
File Size
518.52 KB
Filename: FR_spec_TEW-676APBO(v1.0R).pdf
Date
8/29/2012
File Size
563.45 KB
Filename: GE_spec_TEW-676APBO(v1.0R).pdf
Date
8/29/2012
File Size
566.00 KB
Filename: SP_spec_TEW-676APBO(v1.0R).pdf
Date
8/29/2012
File Size
563.08 KB
Filename: RU_spec_TEW-676APBO(v1.0R).pdf
Date
2/7/2014
File Size
995.15 KB
Filename: IT_spec_TEW-676APBO(v1.0R).pdf
Date
8/29/2012
File Size
555.67 KB
Filename: EUNL_TEW-676APBO(V1.0R).pdf
Date
4/19/2013
File Size
4.92 MB
Filename: EN_Web_TEW-676APBO(1.01).pdf
Date
3/28/2012
File Size
1.31 MB
Filename: FR_Web_TEW-676APBO(1.01).pdf
Date
3/28/2012
File Size
1.39 MB
Filename: GE_Web_TEW-676APBO(1.01).pdf
Date
3/28/2012
File Size
1.32 MB
Filename: PO_Web_TEW-676APBO(1.01).pdf
Date
3/28/2012
File Size
1.28 MB
Filename: SP_Web_TEW-676APBO(1.01).pdf
Date
3/28/2012
File Size
1.32 MB
Filename: RU_Web_TEW-676APBO(1.01).pdf
Date
3/28/2012
File Size
2.06 MB
Filename: UG_TEW-676APBO(v1.0R).pdf
Date
5/10/2012
File Size
4.30 MB
JPEG Image
File Size: 198.06 KB
Date: 3/28/2012
Download
JPEG Image
File Size: 320.11 KB
Date: 3/28/2012
Download
JPEG Image
File Size: 239.45 KB
Date: 3/28/2012
Download
TIFF Image
File Size: 2.43 MB
Date: 3/28/2012
Download
TIFF Image
File Size: 4.07 MB
Date: 3/28/2012
Download
TIFF Image
File Size: 2.65 MB
Date: 3/28/2012
Download
Press and hold in the reset button for 10 seconds while the power is on.
The default values are as follows.
IP Address: 192.168.10.100
Username: root
Password: root
SSID: TRENDnet676
Encryption: none...
Log in to the TEW-676APBO by entering 192.168.10.100 into the address line of your browser.
The default Username and Password are both root.
...
Log in to the first TEW-676APBO by entering 192.168.10.100 into the address line of your browser.
The default username and password are both root.
Click Wizard > Wizard Setup then click Next.
Select WDS then click Next.
Each unit must be configured with a unique IP address. Set...
Log in to the TEW-676APBO by entering 192.168.10.100 into the address line of your browser.
The default Username and Password are both root.
Click on Wireless > Virtual AP Setup then click Edit next to the Primary AP.
Select the highest form of security supported by your wireless clients. ...
The TEW-676APBO comes with an internal high powered 12dBi patch antenna.
The TEW-676APBO is not an 802.3af compliant device. It uses a proprietary Power over Ethernet adapter. You must use the PoE injector that comes with the TEW-676APBO. ...
The TEW-676APBO is a 5GHz device only. It does not support 2.4GHz wireless clients.
Press and hold in the reset button for approximately 15 seconds while the power is on.
The default values are as follows.
IP Address: 192.168.10.100
Username: root
Password: root
SSID: TRENDnet676
Encryption: none
...
Hardware |
Standards | - Wired: IEEE 802.3u (100Base-TX)
- Wireless: IEEE 802.11a/n (5 GHz)
|
LED Indicator | - Power, LAN, WLAN (wireless activity)
|
Antenna | - 12dBi patch antenna (polarization: V30°, H30°)
|
PoE | - 1 x 10/100Mbps RJ-45 PoE port, Passive only (non-802.3af compliant)
|
Dimension (L x W x H) | - 215 x 122 x 66 mm ( 8.5 x 4.8 x 2.6 in)
|
Weight | |
Power Consumption | |
Management | - Web browser (HTTP/HTTPS), SNMP (v2c and 3), Telnet, SSH
|
Wind Speed Support | |
Waterproof | |
Temperature | - Operating: -20° ~ 60°C (-4°F ~ 140°F)
- Storage: 0° ~ 60°C (32°F ~ 140°F)
|
Humidity | - Max. 95% (non-condensing)
|
Power | - PoE power injector DC output: 48VDC, 0.4A
|
Certifications | |
Wireless |
Frequency | |
Modes | - Router, Access Point + WDS, WDS, CPE, Client Bridge + Repeater, CPE + Access Point
|
Virtual Access Points | |
Associated Clients (max) | - 224 (AP Mode), 32 (Repeater Mode)
|
Coverage* | |
Modulation Technique | - 802.11a: OFDM with BPSK, QPSK, QAM and 64QAM
- 802.11n: BPSK, QPSK, 16-QAM, 64-QAM
|
Data Rate (auto-fallback) | - 802.11a: up to 54Mbps
- 802.11a/n: up to 300Mbps
|
Encryption | - 64/128/152-bit WEP, WPA /WPA2-PSK, WPA/WPA2-RADIUS for AP/CPE mode, WEP/WPA2-PSK for WDS mode MAC filter (20 entries) and IP filter (20 entries)
|
Output Power | |
Receiving Sensitivity | - 802.11a: -91dBm (typical) @ 6Mpbs
- 802.11a/n: -68dBm (typical) @ 300Mbps
|
Channels | |
PACKAGE CONTENTS |
- TEW-676APBO
- CD-ROM (User's Guide)
- Multi-Language Quick Installation Guide
- Mounting hardware
- PoE Injector and power cord
- Water-proof RJ-45 plug (Network cable not included)
- Grounding wire
|
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.