Login to My Account   Partners  
Click to change countryUnited Kingdom (change)

100Base-TX to 100Base-FX Single Mode SC Fiber Converter

TFC-210S30 (Version 1.0R)
  • SC-type single-mode fiber port connects over distances of up to 30km
  • 10/100Base-TX port supports Auto-Negotiation, Auto-MDIX and Full-Duplex mode
  • Functions as a stand alone converter or with the TFC-1000 fiber chassis

The TFC-210S30 (Version 1.0R) has been discontinued.  For a list of discontinued products, click here.
  • IEEE 802.3 10Base-T
    IEEE 802.3u 100Base-TX, 100Base-FX
Network Media
  • 10Base-T: UTP/STP Cat. 3, 4, 5, EIA/TIA-568 100-ohm
  • 100Base-TX: UTP/STP Cat. 5, EIA/TIA-568 100-ohm
  • 100Base-FX: 9/125um Single Mode Simplex SC-Type Cable, up to 30km
Minimum Cable Length 2KM (A third party attenuator is required if the cable length is less than 2KM)
Protocol CSMA/CD
Frame Packet Size 64 to 1600 Bytes
Ports 1 x 10/100Base-TX : RJ-45 Port
1 x 100Base-FX : Single-Mode SC-Type Fiber Port
Dip Switch
Dip Switch 1: ON: TX Port Fully Duplex
OFF: TX Port Auto- Negotiation
Dip Switch 2: ON: FX Port Half Duplex
OFF: FX Port Full Duplex
Dip Switch 3: ON: LLCF Enable
OFF: LLCF Disable
Dip Switch 4:

ON: Pure Converter Mode
OFF: Switch Converter Mode

* After changing the DIP Switch settings, power cycle the Fiber Converter.
Transfer Rate 100Mbps (Half/Full Duplex)
Diagnostic LED
  • Per Device: Power
  • Per Port (TX): 100Mbps, Link/Activity, FullDuplex/Collision
    (FX): Link/Activity, Full Duplex/Collision
Power Adapter 9V DC, 700mA External Power Adapter
Power Consumption 2.7 Watts (max)
Dimensions 85 x 125 x 25mm (3.35 x 4.92 x 0.98in.)
Weight 300g (10.6oz.)
  • Operating : 0° C ~ 45° C (32° F ~ 113° F)
  • Storage : -40° C ~ 70° C (-40°F ~ 158° F)
Humidity 5% ~ 90% RH
Certification CE, FCC

Package Contents

  • TFC-210S30
  • Multi-Language Quick Installation Guide
  • Power Adapter