DO NOT upgrade firmware on any TRENDnet product using wireless connection. Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with "wired" network connection only |
Firmware upgrade failure may permanently damage the unit and causing it not to function. Please check the "Firmware Release Note" on our web site and if the issues in the note do not address the problem you are experiencing, please do not upgrade the firmware. |
Firmware Version: v2.5
Release Date: Nov 2007
Release NoteFirmware version 2.5
1. Fixes "LED display incorrectly when "over-current" on port 8".
Previous Firmware version 2.4 (first release).
Firmware Upgrade InstructionPlease download and unzip the firmware file, then follow the instructions in the "readme.txt" to update the firmware.
Filename: Firmware_TPE-80WS_v2.5.zip
SHA-1 Checksum: 5D46B18AFB3BE65185BCF8F8D866C1EF96CB269E
Date
7/25/2017
File Size
201.00 KB
Filename: EN_Spec_TPE-80WS(V1.0R)_081909.pdf
Date
8/24/2009
File Size
408.21 KB
Filename: FR_Spec_TPE-80WS(V1.0R).pdf
Date
11/14/2007
File Size
480.32 KB
Filename: GE_Spec_TPE-80WS(V1.0R).pdf
Date
11/14/2007
File Size
479.70 KB
Filename: SP_Spec_TPE-80WS(V1.0R).pdf
Date
11/14/2007
File Size
477.29 KB
Filename: RU_Spec_TPE-80WS(V1.0R).pdf
Date
11/14/2007
File Size
755.40 KB
Filename: EN_QIG_TPE-80WS.pdf
Date
11/8/2007
File Size
779.35 KB
Filename: FR_QIG_TPE-80WS.pdf
Date
11/8/2007
File Size
777.86 KB
Filename: GE_QIG_TPE-80WS.pdf
Date
11/8/2007
File Size
778.39 KB
Filename: PO_QIG_TPE-80WS.pdf
Date
11/9/2007
File Size
770.26 KB
Filename: SP_QIG_TPE-80WS.pdf
Date
11/8/2007
File Size
776.14 KB
Filename: RU_QIG_TPE-80WS.pdf
Date
11/8/2007
File Size
1.15 MB
Filename: UG_TPE-80WS.pdf
Date
9/7/2007
File Size
1.06 MB
JPEG Image
File Size: 303.41 KB
Date: 9/7/2007
Download
JPEG Image
File Size: 232.11 KB
Date: 9/7/2007
Download
JPEG Image
File Size: 233.74 KB
Date: 9/7/2007
Download
TIFF Image
File Size: 3.34 MB
Date: 9/7/2007
Download
TIFF Image
File Size: 1.14 MB
Date: 9/7/2007
Download
TIFF Image
File Size: 2.87 MB
Date: 9/7/2007
Download
You can find a complete list of products here....
100 meters is the maximum length of cable you can have between the TPE-80WS and the powered device.
The TPE-102S PoE Splitter will work with the TPE-80WS, however the TPE-102S PoE Splitter will only operate at a maximum of 100Mbps....
Yes, you are able to use non-Power over Ethernet devices with TPE-80WS.
Power over Ethernet technology uses digital signatures to identify PoE devices and their proper powering requirements, and any device that does not have a digital signature will not be powered ensuring its protection....
The TPE-80WS is compatible with Category-5e (Cat-5e) & Category-6 (Cat-6).
There are currently two implementations of the IEEE 802.3af PoE standard; Mode A is powering the device over the data pins (1,2,3,6) on the Ethernet cable, and Mode B is powering the device over the spare pings (4,5,7,8) on the Ethernet cable. TRENDnet devices use the IEEE 802.3af (Mode A) implement...
The TPE-80WS will work with all devices that support Power over Ethernet standard 802.3af (Mode A).
PoE is an acronym for Power over Ethernet, which is a technology that allows users to connect devices up to 100 meters without a power source...
Hardware |
Standard | - EEE802.3 10Base-T, IEEE802.3u 100Base-TX, IEEE 802.3z 1000Base-T
- EEE802.1Q Tag-VLAN, IEEE 802.1D Spanning Tree, IEEE 802.1w RSTP
- EEE 802.1x (MD5), IEEE 802.1p QoS, IEEE802.3ad Link Aggregation
- IEEE 802.3x Flow Control, IEEE802.3af Power over Ethernet
|
Network Media | - 10Mbps: Cat 3,4,5 Unshielded Cable
- 100Mbps: Cat 5, 5E, 6 Unshielded Cable
- 1000Mbps: Cat 5E, 6unshielded cable
|
Protocol / Topology | CSMA/CD ; Star |
Interface | 8x 10/100/1000Mbps Auto-MDIX PoE ports RS-232 serial port for local management |
Data Transfer Rate | - Ethernet: 10/20Mbps (half/full duplex)
- Fast Ethernet: 100/200Mbps (half/full duplex)
- Gigabit: 2000Mbps (full duplex)
|
RAM Buffer /Filtering | 144 Kbytes / 8K entry per device |
Switch Fabric | 16G forwarding capacity |
Power | Input: 100~240VAC, 50/60Hzinternal power supply |
Diagnostic LEDs | - Per Unit: Power
- Per Port: Link/Activity, Speed
- PoE: PoE Fault / PoE Operating
|
Power Consumption | - 6.3 watts max (no power device connected)
- 130 watts max (with PoE Device connected)
|
Temperature | - Operating: 5° ~ 45° C (41° ~ 113°F)
- Storage: -20° ~ 70° C (-4° ~ 158°F)
|
Humidity | 5%- 90% (non-condensing) |
Dimensions | 280 x 205 x 44mm (11 x 8 x 1.8 inches) |
Weight | 2kg (4 lb) |
Certification | CE, FCC |
PoE |
Power over Ethernet | - Up to 15 watts (-48V) per Port; PD classification Identify
- PoE Over Current Protection; PoE circuit shorting protection (max 350mA)
- PoE Power on RJ-45 pin 3,6 for Power+ and pin 1,2 for Power-
|
PACKAGE CONTENTS |
- TPE-80WS
- Multi-Language Quick Installation Guide
- User's guide CD-ROM
- RS-232 serial cable
- Power cord & rackmount kit
|
All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.