 |
| PoE Switches |
|
TPE-TG81g (Version v1.0R)
- 8 x Gigabit PoE+ ports (up to 30 watts per PoE+ port)
- Internal power supply
- Reduces equipment cost by delivering data and power over existing network cables
- 16 Gbps switching capacity
- Sturdy rack mountable metal case
- Up to 75% GREENnet power savings
|
|
|
 |
 |
|
TPE-TG80g (Version v2.0R)
- 8 x Gigabit PoE+ ports (up to 30 watts per PoE+ port)
- Reduces equipment cost by delivering data and power over existing network cables
- 16 Gbps switching capacity
- Sturdy metal case
- Up to 75% GREENnet power savings
|
|
|
| |
|
|
TPE-TG44g (Version v1.0R)
- 4 x Gigabit PoE / PoE+ ports (up to 30 watts per PoE+ port)
- 4 x Gigabit ports
- Reduces equipment cost by delivering data and power over existing network cables
- 16 Gbps switching capacity
- Sturdy metal case
- Up to 75% GREENnet power savings
|
|
|
| |
|
|
TPE-T88g (Version v1.0R)
- 8 x 10/100 Mbps PoE / PoE+ ports
- 8 x 10/100 Mbps Ethernet ports
- Reduces equipment cost by delivering data and power over existing network cables
- 3.2 Gbps switching capacity
- Sturdy metal case and rack mountable
- Up to 75% GREENnet power savings
|
|
|
| |
|
|
TPE-T80 (Version v1.0R)
- 30 watts per PoE+ port
- Reduces equipment cost by delivering data and power over existing network cables
- 8 x 10/100Mbps PoE+ ports
- 1.6 Gbps switching capacity
- Sturdy metal enclosure
- Up to 75% GREENnet power savings
|
|
|
| |
|
|
TPE-T160 (Version v1.0R)
- 30 watts per PoE+ port
- Reduces equipment cost by delivering data and power over existing network cables
- 16 x 10/100Mbps PoE+ ports
- 3.2 Gbps switching capacity
- Sturdy 1U 19” wide rack mountable metal enclosure
- Up to 75% GREENnet power savings
|
|
|
| |
|
|
TPE-S80 (Version v1.0R)
- Reduces equipment cost by delivering data and power over existing network cables
- 8 x 10/100Mbps Full Duplex PoE ports
- 1.6Gbps switching capacity
- Use with TRENDnet's PoE Splitter to network and power non-PoE devices
|
|
|
| |
|
|
TPE-S44 (Version A2.1R)
- Reduces equipment cost by delivering data and power over existing network cables
- 4 PoE and 4 standard 10/100Mbps ports
- Flow Control for Full-Duplex mode
|
|
|
| |
|
|
TPE-S160 (Version V1.0R)
- Reduces equipment cost by delivering data and power over existing network cables
- 16 x 10/100Mbps Full Duplex PoE ports
- 3.2Gbps switching capacity
- Use with TRENDnet's PoE Splitter to network and power non-PoE devices
|
|
|
| |
|
|
TPE-224WS (Version B1.11R)
- Reduces equipment cost by delivering data and power over existing network cables
- 24 x PoE 10/100Mbps ports, 4 x Gigabit Auto-MDIX ports and 2 x shared Mini-GBIC slots
- 12.8Gbps switching capacity with SNMP v1, 802.1X and STP support
- Features 802.1Q VLAN, Asymmetric VLAN, QoS, IGMP, Trunking and Mirroring
|
|
|
| |
|
| PoE Splitters / Injectors |
|
TV-JC35 (Version V1.0R)
- Connects TRENDnet Power over Ethernet (PoE) splitters to devices with 3.5mm low voltage power ports
- Connect TRENDnet PoE splitters to TRENDnet TV-IP410(W) and TV-IP422(W) Internet security cameras
|
|
|
| |
|
|
TPE-115GI (Version v1.0R)
- Full Duplex Gigabit speeds
- Converts a non-PoE Gigabit port to a PoE+ or PoE Gigabit port
- Integrated power supply
- Network distances of up to 100 meters (328 feet)
- Save on installation and equipment costs
|
|
|
| |
|
|
TPE-114GS (Version v1.0R)
- Used to install a non-PoE device in remote locations
- Splits a networked PoE signal into separate power and Gigabit data sources
- Set the output power to either 5V, 7.5V, 9V, or 12V
- Use this compact device with TRENDnet PoE switches or injectors
- Save on installation and equipment costs
|
|
|
| |
|
|
TPE-113GI (Version v1.0R)
- Full Duplex Gigabit speeds supported
- Use non-PoE switches to network PoE devices at distances of up to 100 meters (328 feet)
- Save on installation and equipment costs
- Create an integrated PoE and non-PoE Gigabit network
|
|
|
| |
|
|
TPE-105I (Version v1.0R)
- Full Duplex Ethernet speeds
- Converts a non-PoE Ethernet port to a PoE+ or PoE port
- Integrated power supply
- Network distances of up to 100 meters (328 feet)
- Save on installation and equipment costs
|
|
|
| |
|
|
TPE-104S (Version v1.0R)
- Used to install a non-PoE device in remote locations
- Splits a networked PoE signal into separate power and data sources
- Set the output power to either 5V, 7.5V, 9V, or 12V
- Use this compact device with TRENDnet PoE switches or injectors
- Save on installation and equipment costs
|
|
|
| |
|
|
TPE-103I (Version v1.0R)
- Full Duplex Fast Ethernet speeds supported
- Use non-PoE switches to network PoE devices at distances of up to 100 meters (328 feet)
- Save on installation and equipment costs
- Create an integrated PoE and non-PoE network
|
|
|
| |
|
| PoE Access Points |
|
TEW-715APO (Version v1.0R)
- Built in dual polarization directional 8 dBi antenna for distances of up to 6 miles (10 km)*
- Supports Access Point, Wireless Client, WDS, Bridge, CPE, and Repeater modes
- Supports an external omni-directional antenna with a N-Type connector (not included) for blanket outdoor wireless applications
- Outdoor IP55 weather rated enclosure
- Includes Power over Ethernet (PoE) injector
- Pole mount hardware included
|
|
|
| |
|
|
TEW-676APBO (Version v1.0R)
- High speed wireless n building-to-building connections
- Supports Access Point, Router Access Point, Wireless Distribution System (WDS), Customer Premises Equipment (CPE), and Repeater modes
- IP-66/67 rated aluminum housing
- Powered by Power over Ethernet (PoE) technology
|
|
|
| |
|
|
TEW-638PAP (Version v1.0R)
- No need to install this access point near a power source, power and data are received through a single Ethernet cable
- Features Access Point Client mode, Wireless Distribution System (WDS) support, and detachable antennas
- Quickly connect wireless clients with one-touch Wi-Fi Protected Setup (WPS)
- Advanced wireless encryption and Wireless Multimedia (WMM) QoS technology
|
|
|
| |
|
|
TEW-455APBO (Version v2.0R/v2.1R/v2.2R)
- Supports Access Point, Wireless Distribution System (WDS), and Customer Premises Equipment (CPE) modes
- Add additional high-gain antennas for extended range projects
- Rugged aluminum housing and built-in antenna for extreme weather conditions
- Device powered by an Ethernet cable with Power over Ethernet (PoE) technology
|
|
|
| |
|
|
TEW-653AP (Version v1.0R)
- Features Access Point, WDS, and Repeater modes
- No need to install the device near a power source using PoE technology
- Assign individual VLANs for up to four separate SSIDs
- Advanced encryption, WMM® QoS and SNMP support
|
|
|
| |
|
| PoE IP Cameras |
|
TV-IP572PI (Version v1.0R)
- See more with Megapixel resolution up to 1280 x 800 (WXGA)
- Night vision up to 7.5 meters*
- No need to install this camera near a power source, power and data are received through a single Ethernet cable
- Program motion detection recording, recording schedules, email alerts and more with complimentary software
- 2-way audio
|
|
|
| |
|
|
TV-IP572P (Version v1.0R)
- See more with Megapixel resolution up to 1280 x 800 (WXGA)
- No need to install this camera near a power source, power and data are received through a single Ethernet cable
- Program motion detection recording, recording schedules, email alerts and more with complimentary software
- 2-way audio
|
|
|
| |
|
|
TV-IP522P (Version v1.0R)
- Megapixel resolution up to 1280 x 960
- No need to install this camera near a power source, power and data are received through a single Ethernet cable
- Program motion detection recording, recording schedules, email alerts and more with complimentary software
- Features a removable lens, I/O ports, 2-way audio and a mounting kit
|
|
|
| |
|
|
TV-IP512P (Version v1.3R)
- No need to install this camera near a power source, power and data are received through a single Ethernet cable
- View streaming video, hear sounds and record from any Internet connection
- Program motion detection recording, email* alerts and more with complimentary software
- Features a removable lens, I/O ports and 2-way audio
|
|
|
| |
|
|
TV-IP262PI (Version v1.0R)
- Indoor night vision for up to 12 m (40 ft.)
- Megapixel resolution with H.264 compression
- Adjustable fixed position camera
- Save installation costs with Power over Ethernet (PoE)
- DHCP IPv6 Auto Configuration
|
|
|
| |
|
|
TV-IP262P (Version v1.0R)
- Megapixel resolution with H.264 compression
- Tamper resistant interior wall and ceiling mount applications
- Adjustable fixed position camera
- Save installation costs with Power over Ethernet (PoE)
- Program motion detection recording, email alerts, and more with complimentary software
- Free mobile viewing App
|
|
|
| |
|
|
TV-IP252P (Version B1.xR)
- Tamper resistant interior wall and ceiling mount applications
- Pan and tilt adjustable fixed position camera
- No need to install this camera near a power source, power and data are received through a single Ethernet cable
- Program motion detection recording, email alerts and more with complimentary software
|
|
|
| |
|
|
TV-IP672PI (Version v1.0R)
- See more with Megapixel resolution up to 1280 x 800 (WXGA)
- Night vision up to 7.5 meters indoors*
- Pan 340° side-to-side and tilt 115° up-and-down
- No need to install this camera near a power source, power and data are received through a single Ethernet cable
- Program motion detection recording, recording schedules, email alerts and more with complimentary software
- 2-way audio
|
|
|
| |
|
|
TV-IP672P (Version v1.0R)
- See more with Megapixel resolution up to 1280 x 800 (WXGA)
- Pan 340° side-to-side and tilt 115° up-and-down
- No need to install this camera near a power source, power and data are received through a single Ethernet cable
- Program motion detection recording, recording schedules, email alerts and more with complimentary software
- 2-way audio
|
|
|
| |
|
|
TV-IP612P (Version 1.0R)
- 10x optical zoom, 16x digital zoom, and auto focus
- No need to install this camera near a power source, power and data are received through a single Ethernet cable
- Pan 330° side-to-side and tilt 115° up-and-down
- Program motion detection recording and email alerts with complimentary software
|
|
|
| |
|
|
TV-IP322P (Version v1.0R)
- Narrow field of vision for long distance monitoring
- Night vision up to 20 meters (66 ft.)
- Outdoor installation ready with an IP66 weather proof rating
- H.264 Megapixel resolution at up to 1280 x 1024
- Save installation cost with Power over Ethernet (PoE)
- Program motion detection recording and email alerts with complimentary software
|
|
|
| |
|
|
United States [
