Login to My Account   Partners  
Click to change countryUnited States (change)
 

10 dBi Wireless N300 Outdoor PoE Preconfigured Point-to-Point Bridge Kit

TEW-740APBO2K (Version v2.0R)

  • Wireless N300 point-to-point networking (2.4 GHz)
  • 2 x preconfigured Wireless N access points
  • IPX6 outdoor weather rated housing
  • Built-in 10 dBi directional antenna

TRENDnet’s 10 dBi Wireless N300 Outdoor PoE Preconfigured Point-to-Point Bridge Kit, model TEW-740APBO2K, provides Wireless N300 point-to-point connectivity. This preconfigured kit provides installers the simplest way to create a long distance wireless point-to-point bridge. Conveniently link two locations together with wireless N speed and performance.

Preconfigured Point-to-Point Bridge
Reduce installation and setup time with this preconfigured and pre-encrypted long range wireless bridge kit
PoE Power Adapter
Included power adapter provides power and data over a single Ethernet cable with a maximum distance of 60 m (197 ft.)
Outdoor Ready
Durable enclosure with an IPX6 outdoor weather rating

Preconfigured Kit
Reduce installation and setup time with this preconfigured and pre-encrypted long range wireless bridge kit
Wireless N300 (2.4 GHz)
Compliant with 802.11b/g/n technology (2.4 GHz) with data rates up to 300 Mbps*
Outdoor Rated
Durable enclosure with an IPX6 outdoor weather rating
Directional Antenna
Built-in 10 dBi directional antenna
PoE Power Adapter
Proprietary PoE power adapter included
Mounting Hardware
Pole and wall mount hardware included
LED Indicators
LEDs convey wireless link quality in WISP mode
  • Standards
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.1d
  • IEEE 802.1p
  • IEEE 802.1Q
  • IEEE 802.1X
  • IEEE 802.11d
  • IEEE 802.11e
  • IEEE 802.11f
  • IEEE 802.11h
  • IEEE 802.11i
  • IEEE 802.11b
  • IEEE 802.11g
  • IEEE 802.11n (2.4 GHz up to 300 Mbps)
  • IEEE 802.11r
  • IEEE 802.11k
  • Hardware Interface
  • 1 x 10/100 Mbps LAN1 port (proprietary PoE max. cable length 60 m (197 ft.))
  • 1 x 10/100 Mbps LAN2 port
  • LED indicators
  • Reset button
  • Grounding Point
  • Special Features
  • IPX6 weather rated
  • 802.1Q VLAN assignment per SSID
  • Schedule radio on/off time policy
  • 802.11r / 802.11k fast roaming
  • Preconfigured point-to-point bridge kit
  • Access Control
  • Wireless encryption: WPA/WPA2-PSK, WPA/WPA2-Enterprise, 802.1X
  • Firewall (CPE Mode): NAT, Virtual Server, DMZ Host, PPTP/L2TP/IPsec VPN Passthrough
  • Access Controls: MAC, IP Filter, Layer 2 Client Isolation, Per-SSID client limiting
  • 802.1Q VLAN
  • Authentication 2.0 / Walled Garden for guest authentication
  • Customizable captive portal for guest authentication
  • QoS
  • WMM
  • Operation Modes
  • Access Point (AP)
  • Access Point (AP) + WDS
  • Wireless Distribution System (WDS)
  • WISP (CPE) + AP
  • Client Bridge + AP
  • Router
  • Control AP (CAP)
  • SSID
  • Up to 7 SSIDs
  • Internet Connection Types (WISP (CPE) + AP & Router modes)
  • Dynamic IP (DHCP)
  • Static IP (Fixed)
  • PPPoE (Dynamic IP/Static IP)
  • PPTP (Dynamic IP/Static IP)
  • Management/Monitoring
  • Local/remote web based management (HTTP, HTTPS)
  • Local/remote CLI based management (Telnet, SSH)
  • SNMP v2c/v3
  • SNMP Trap
  • Upgrade firmware
  • Backup/restore configuration
  • Event logging
  • Authentication log
  • Reboot
  • Restore to factory defaults
  • Ping test
  • Traceroute
  • LED Control
  • Frequency
  • FCC: 2.412 - 2.462 GHz
  • ETSI: 2.412 – 2.472 GHz
  • IC: 2.412 - 2.462 GHz
  • Wireless Channels
  • FCC: 1-11
  • ETSI: 1-13
  • Modulation
  • 802.11b: DBPK, DQPSK, CCK with DSSS
  • 802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM with OFDM
  • Media Access Protocol
  • CSMA/CA with ACK
  • Antenna Gain
  • 10 dBi internal sector antenna
  • Wireless Output Power/Receiving Sensitivity
  • 802.11b: FCC/ETSI: FCC: 28 dBm (max.), ETSI: 10.4 dBm (max.), IC: 28 dBm (max.)/-88 dBm (typical) @ 11 Mbps
  • 802.11g: FCC/ETSI: FCC: 26 dBm (max.), ETSI: 10.5 dBm (max.), IC: 26 dBm (max.)/- 74 dBm (typical) @ 54 Mbps
  • 802.11n: FCC/ETSI: FCC: 26 dBm (max.), ETSI: 10.6 dBm (max.), IC: 26 dBm (max.)/- 69 dBm (typical) @ 300 Mbps
  • Power
  • Input: 100 – 220 V, 50 - 60 Hz, 0.5 A
  • Output: 12V / 1A
  • Consumption: 13.5 Watts Max.
  • Operating Temperature
  • -20 - 60° C (-4 - 140° F)
  • Operating Humidity
  • Max. 99 % non-condensing
  • Certifications
  • CE
  • FCC
  • Dimensions
  • 195 x 118 x 61 mm (7.6 x 4.6 x 2.4 in.) per access point
  • Weight
  • 320 g (0.7 lbs.) per access point
  • Warranty
  • 3 year
 

Package Contents

  • 2 x TEW-740APBO
  • CD-ROM (User’s Guide)
  • Quick Installation Guide
  • Mounting hardware
  • Proprietary PoE injectors
  • Power adapters (12 V DC, 1 A)
  • Grounding wires