Login to My Account   Partners  
Click to change countryUnited States (change)
 

Single Channel PoE Analog to IP Video Encoder

TV-VS1P (Version v1.0R)

  • Provides advanced IP-based functionality to an analog CCTV camera
  • View a CCTV camera from any Internet connection and on compatible mobile phones
  • No need to install this device near a power source, power and data are received through a single Ethernet cable
  • Motion detection recording, email alerts, and alarm triggers
  • Schedule recording sessions to a server with Samba client support
SecurView IP Camera Critical
Firmware Update Available


DISCONTINUED PRODUCT
The TV-VS1P (Version v1.0R) has been discontinued.  For a list of discontinued products, click here.

TRENDnet's Single Channel PoE Analog to IP Video Encoder, model TV-VS1P, provides advanced IP-based camera functionality to a traditional analog CCTV camera. Convert analog video to digital; view video over any internet connection; record video to a server; and manage motion detection recording and email alerts. No need to install this device near a power source, power and data are received through a single Ethernet cable.

The TV-VS1P converts analog video to resolutions of up to 704 x 480 pixels (4CIF) at 30 frames per second for H.264, MPEG-4, or MJPEG compressed video. Two-way audio support facilitates audio recording and two-way communications. Remote Pan/Tilt/Zoom and Auto Patrol is supported for Pelco D compliant PTZ cameras. Advanced features include motion detection recording, email alerts, scheduled recording sessions, 3GPP support, Samba client support, Input/Output ports to network to alarm systems, date-and-time and other text overlays, mask overlays to conceal sensitive areas, an SD card slot, and digital zoom. This compact device can be mounted on most surfaces.


  • IEEE 802.3af PoE compliant device
  • 1 x 10/100Mbps PoE Auto-MDIX RJ-45 port
  • Optional power port for non-PoE installations
  • SD/SDHC card slot *
  • BNC video out and video in connectors
  • Audio support: built-in Audio jacks for additional 3rd party microphone and speaker
  • Input/Output ports (GPIO) to network to alarm systems
  • Diagnostic Power and Link LEDs
  • Four installation mounting points
  • 3x digital zoom
  • Pelco D and Pelco P pan/tilt/zoom support: Define Auto-Patrol pan tilt with up to 32 viewing nodes
  • High quality H.264, MPEG-4, and MJPEG video recording
  • Resolution up to 704 x 576 pixels and up to 30 frames per second (fps)
  • Stream Network camera video to a 3GPP compatible wireless device
  • Dynamic DNS support
  • Images controls: brightness, saturation, contrast, Hue ,and Wide Dynamic Range Correction (WDRC)
  • Time, date, and other text overlays
  • Mask overlays conceal sensitive areas
  • Supports TCP/IP networking, SMTP Email, HTTP, and other Internet protocols
  • Recording type: continuous, schedule, or motion detection
  • Record streaming video to your computer or Network Storage device with Samba support
  • Three motion detection windows with just-in-time snapshot , motion detection triggered email alerts, and image upload to FTP
  • Event trigger: motion detection or Input/Output signal
  • Event response: email alert, instant snapshot, or video recording
  • Send instant messages to Jabber client via Jabber Server
  • Supports Quality of Service (QoS) with Differentiated Services Code Point (DSCP)
  • Quick Universal Plug and Play (UPnP) installation
  • 3-year limited warranty

* SD/SDHC card sold separately

General
Video
  • Video In: CVBS / 1 Vp-p0.2 / 75 Ohms; BNC connecter
  • Video Out: CVBS /1 Vp-p /75 Ohms; BNC connecter
Audio
  • Line Input: 3.5mm jack (CCTP audio)
  • Line Output: 3.5mm jack (Speaker)
  • Format: PCM/AMR
  • 2 Way audio supported
GPIO
  • Ground, GPIO in/out, DV12V output, RS485 TX+/TX-
SD Slot
  • Supports SD/SDHC (up to 32GB)
Pan/Tilt/Zoom
  • Protocol: Pelco D and Pelco P32 presetsAuto Patrol
Hardware
Network
  • IEEE 802.3u 10/100Mbps Fast Ethernet, Auto-MDIXIEEE 802.3af PoE
LED
  • Power, Link
Reset Button
  • Push and release to rebootPush and hold for 5 seconds to restore to factory default
Power Consumption
  • 7 Watts
Power
  • 12V, 1.5A external power adapter (for non-PoE installation)
Dimension
  • 160 x 109 x 36 mm (6.3 x 4.3 x 1.4 in.)
Weight
  • 445 g (15.7 oz.)
Temperature
  • Operating: 0C ~ 45C (32F ~ 113F)
  • Storage: -15C ~ 60C (5F ~ 140F)
Humidity
  • Max. 85% (non-condensing)
Certifications
  • CE, FCC
Requirement
Management Interface
  • Internet Explorer 6.0 or above
To run Utility
  • Windows 7(32/64-bit), Vista(32/64-bit), XP(32/64-bit)
Network Protocols
  • TCP/IP, IPv4/IPv6, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, HTTPs, Samba, PPPoE, UPnP, Bonjour, RTP, RTSP, RTCP
Management
Remote
  • Remote management supported
Backup / Restore
  • Save/retrieve configuration files
Settings
Image
  • Brightness, contrast, saturation, mirror (horizontal/vertical)
Video Encoder
  • Encoding type: H.264, MPEG4, MJPEGResolution/frame rate(auto-sensing)704 x 480, 352 x 240, 176 x 120, up to 30 fps (NTSC)
  • 704 x 576, 352 x 288, 176 x 144, up to 25 fps (PAL)
  • Compression: 5 levels
Recording
  • Recording type: continuous, schedule, or motion detection
Port Settings
  • HTTP port: 80 (default), RTSP (554)
Digital Zoom
  • 3x
Dynamic DNS
  • Yes
Time
  • Synchronize with NTP server or set time/date manually
SMTP
  • Supported up to 2 destination accounts
System Log
  • 100 items
PACKAGE CONTENTS
  • TV-VS1P
  • Multi-language Quick Installation Guide
  • CD-ROM (Utility & User’s Guide)
  • Network cable (1.8 m / 6 ft.)
  • GPIO Connector
  • Audio and cable (3.5 mm)
  • Power adapter (12 VDC, 1.5 A)
  • Mounting accessories