How do I upgrade the firmware on my router?

Step 1 Log into the Router by entering it’s IP address into a browser. The default IP address is At the login, enter your username (admin) and password (admin).

Step 2 Click “Tools” on the left hand side then click on “Firmware” at the top of the page.

Step 3 Click on “Browse” next to the box under the Upgrade Firmware section. Locate and select the firmware file then click “Upgrade”.

It will take approximately 30 seconds to upgrade the firmware and the access point to restart.


Knowledgebase ID
Created: 12/14/2005
Modified: 12/14/2005
No attachments were found.

Would you like to...
Print this page
Email this to a friend

Post a comment
Rate this KB


Was this answer helpful:
(5 = very helpful.
0 = not helpful at all)
5 4 3 2 1