United States  [change]    
Support
Technical Support
KnowledgeBase
Download Drivers
Product Warranty Policy



KB Questions
If your mouse is not responding, not detected or there is a mouse error check the following:
If your keyboard is not responding, not detected, or you receive a keyboard error, please check the following:
What is the default password for the TK-801R, TK-802R, TK-1601R and TK-1602R?
How do I get my mouse to respond after switching from one computer to another?
Can I turn off the ‘beep’ when switching from one computer to another?
What are the hotkey commands for the TRENDnet KVM switch?
What is the hotkey command to switch from one computer to another?
Does my KVM switch support DVI monitors?
What kinds of mice and keyboards are supported?
How do I switch from one computer to another with the KVM switch?
Will the KVM switch remember the keyboard settings between computers?
Can I connect and disconnect the USB cables while the computers are turned on?
I have the KVM switch connected properly, but my keyboard and mouse don't work.
Where is the power supply? I did not find one in the box.
Search:
Browse:
  Enter KB ID#:
Knowledgebase Home Page > KVM > TK-206i
Where is the power supply? I did not find one in the box.

The TK-206i does not require a power supply. It draws power from your computer's USB connections. As long as your KVM Switch is connected to the USB port, it will receive the necessary power to function.

Knowledgebase ID
236
Created: 2/2/2005
Modified: 2/2/2005
Attachments
No attachments were found.

Would you like to...
Print this page
Email this to a friend
Post a comment
Rate this KB

(0.0)
Was this answer helpful:
(5 = very helpful.
0 = not helpful at all)
5 4 3 2 1
Home | Company | Products | Where to Buy | News & Info | Support | Downloads | Partners | Store | TRENDnetTV
© Copyright 2013 TRENDnet. All Rights Reserved. Contact Us | Privacy Policy   Connect: Facebook Twitter You Tube
Share