How do I upgrade the firmware on my TEW-632BRP?

Go to our website and check for available firmware updates here.

http://trendnet.com/asp/download_manager/list_subcategory.asp?SUBTYPE_ID=1151&SUBMIT=Go

<< Warning! >>
Firmware upgrade failure may permanently damage the unit and causing it not to function. If the issues in the "Release Notes" do not address the problem you are experiencing with the Router, please do not upgrade the firmware.
Do not perform the upgrade if the Router’s firmware is newer than the one that you downloaded from our web site.
DO NOT interrupt the upgrade process. During the upgrade process, DO NOT operate the web browser, DO NOT power off the Router, DO NOT disconnect the network cable, and DO NOT press Router's reset button.

Step 1 Log into the TEW-632BRP by entering its IP address into a browser. The default IP address is http://192.168.10.1. The default username and password are both “admin”.

Step 2 Click “Tools” on the left hand side then click on “Firmware”.

Step 3 Click on “Browse” next to the box under the Firmware Upgrade section. Locate and select the firmware file then click “Upload”.



 

Knowledgebase ID
1413
Created: 11/22/2007
Modified: 1/18/2008
Attachments
No attachments were found.

Would you like to...
Print this page
Email this to a friend

Post a comment
Rate this KB

(2.0)

Was this answer helpful:
(5 = very helpful.
0 = not helpful at all)
5 4 3 2 1