TRENDnet | Support| KnowledgeBase

Knowledge Base

	Search:				Browse:				Enter KB ID#:

Knowledgebase Home Page > Adapters > TV-VS1

Browse "TV-VS1" Questions
There were 19 questions found for TV-VS1:

Question ID

Question

2524

Can I save video directly to a Secure Digital card?
Yes, the Secure Digital card will allow you to save video to it on motion detected and GPIO trigge...

2523

Can I save video to my Network Storage Device?
Yes, log in to the camera and click on Setup then click on Event Server>Network Storage on the lef...

2522

I am unable to use the FTP and email option. When using the "test" I get the message Test Failed!! Error:
The camera must be configured properly to have Internet access. This includes making sure you have ...

2521

What ports do I need to open in my router or firewall to view the camera from a remote location?
By default the camera uses TCP port 80. Forward this port in your router or firewall to the camera...

2520

Can I use SecurView with a Mac?
Unfortunately SecurView is not compatible with Macintosh operating systems.

2519

How can I setup the camera using a Macintosh?
The camera can be configured from a Macintosh through its web-based configuration page. The camer...

2518

How can I configure the TV-VS1(P) through the web-based configuration?
The camera’s web configuration page can be reached by entering its IP address into a web browser. ...

2517

What is the default IP address of the TV-VS1(P)?
The camera by default is configured to receive an IP address via DHCP. If it is unable to receive a...

2516

How do I setup motion detected recording?
Start the SecurView Pro application and login. The default username and password are both “admin”....

2515

How do I upgrade the firmware of my camera?
Download the latest firmware update from our website here. Follow the firmware update instructions...

2514

How do I configure my TV-VS1(P) to email snapshots?
Log in to the camera and click on Setup then click on Event Server>Email on the left hand side. En...

2513

How do I configure my TV-VS1(P) to upload snapshots to an FTP server?
Log in to the TV-VS1(P) and click on Setup then click on Event Server>FTP on the left hand side. En...

2512

How do I view the TV-VS1(P) using SecurView Pro?
After you have the camera configured on your network start SecurView Pro. The default username an...

2511

Which web browsers will allow me to view the video from a TV-VS1(P)?
The supported browsers are Internet Explorer 6.0 or above.

2510

How do I reset my TV-VS1(P) back to factory defaults?
Press and hold in the reset button on the TV-VS1(P) for 5 seconds while the power is on to restore f...

2509

What do the LED’s on the front of the TV-VS1(P) represent?
The orange LED is a power light. It should be a steady orange light when power is applied. The gre...

2508

How do I set a password on my TV-VS1(P) and create user accounts?
Log in to the camera by entering the camera’s IP address into your browser. The default IP address...

2507

Does the TV-VS1(P) support Dynamic DNS and what are the uses of it?
Yes, the camera does support DDNS (Dynamic DNS). Dynamic DNS services will allow you to maintai...

2506

How can I view the TV-VS1(P) remotely if they are behind a router?
You will need to forward the port that the TV-VS1(P) is using in the router to the TV-VS1(P). By ...