TRENDnet | Support| KnowledgeBase

Knowledge Base

	Search:				Browse:				Enter KB ID#:

Knowledgebase Home Page > KVM > TK-206i

Browse "TK-206i" Questions
There were 14 questions found for TK-206i:

Question ID

Question

864

If your mouse is not responding, not detected or there is a mouse error check the following:
Make sure that your mouse is properly connected to the computer and to the KVM switch. Chec...

863

If your keyboard is not responding, not detected, or you receive a keyboard error, please check the following:
Make sure that your keyboard is properly connected to the computer and to the KVM switch....

862

What is the default password for the TK-801R, TK-802R, TK-1601R and TK-1602R?
The default password is eight zeros, “00000000”.

861

How do I get my mouse to respond after switching from one computer to another?
Press Scroll lock + Scroll Lock + End to reset the switch and it should start responding again. I...

860

Can I turn off the ‘beep’ when switching from one computer to another?
Unfortunately, you can not turn it off when switching from one PC to another. You can turn it off w...

859

What are the hotkey commands for the TRENDnet KVM switch?
The User’s Guide or Quick Install Guide has a complete list of hotkey commands. You can download ...

858

What is the hotkey command to switch from one computer to another?
Scroll lock + Scroll lock + Up or Down arrows. For a complete list of hotkey commands please consul...

857

Does my KVM switch support DVI monitors?
Only the TK-404KR and TK-204KR support DVI connections.

856

What kinds of mice and keyboards are supported?
On the TK-207K the console ports are USB and support standard USB mice and keyboards. All other T...

240

How do I switch from one computer to another with the KVM switch?
Because the TK-206i KVM switch supports Hot-Key commands, you can use a Hot-Key command to switch be...

239

Will the KVM switch remember the keyboard settings between computers?
Yes, the KVM switch will remember the keyboard settings when switching between your computers. (i.e....

238

Can I connect and disconnect the USB cables while the computers are turned on?
Yes, you can connect or disconnect the USB cables while the computers are turned on, because the USB...

237

I have the KVM switch connected properly, but my keyboard and mouse don't work.
Please make sure your USB port is working properly by testing it with your other USB devices. Once y...

236

Where is the power supply? I did not find one in the box.
The TK-206i does not require a power supply. It draws power from your computer's USB connections. As...