United States  [change]    
Support
Technical Support
KnowledgeBase
Download Drivers
Product Warranty Policy



KB Questions
What is the maximum cable length for my KVM?
What is the maximum cable length between two daisy-chained KVM switches?
Can I use the KVM Extender (TK-EX2) in between two daisy-chained KVM switches?
Is the TK-1602R wall-mountable?
When searching for a PC by name can I search all daisy-chained KVM switches?
How do I assign names to the KVM ports for easier searching?
What is bank number referring to?
Why would I need to reset my KVM?
How would I reset the TK1602R?
What are console ports and what are they used for?
Where can I purchase compatible cables for my TK-1602R KVM switch?
How many cables come with the TK-1602R?
What is a daisy-chain cable?
How long is the included daisy-chain cable?
What is an OSD?
If your mouse is not responding, not detected or there is a mouse error check the following:
If your keyboard is not responding, not detected, or you receive a keyboard error, please check the following:
What is the default password for the TK-801R, TK-802R, TK-1601R and TK-1602R?
How do I get my mouse to respond after switching from one computer to another?
Can I turn off the ‘beep’ when switching from one computer to another?
What are the hotkey commands for the TRENDnet KVM switch?
What is the hotkey command to switch from one computer to another?
Does my KVM switch support DVI monitors?
What kinds of mice and keyboards are supported?
How do I switch from one computer to another with the KVM switch?
Will the KVM switch restore the keyboard settings when switching between computers?
Can I connect and disconnect the PS/2 cables while the computers are turned on?
Do I need to use the included external AC adapter?
Knowledge Base
Search:
Browse:
  Enter KB ID#:
Knowledgebase Home Page > KVM > TK-1602R

Browse "TK-1602R" Questions
There were 28 questions found for TK-1602R:

 
Question ID Question
1825   What is the maximum cable length for my KVM?
Please refer to the following table. TK-205K Supported Cables* Incl...
1170   What is the maximum cable length between two daisy-chained KVM switches?
Longer replacement cables are not available and it is recommended to use the included KVM cable.
1168   Can I use the KVM Extender (TK-EX2) in between two daisy-chained KVM switches?
Yes the TK-EX2 is compatible with both the TK-1602R and TK-802R KVM switches.
1166   Is the TK-1602R wall-mountable?
No, but the TK-1602R is rack mountable using the included rack mount brackets.
1164   When searching for a PC by name can I search all daisy-chained KVM switches?
Yes
1162   How do I assign names to the KVM ports for easier searching?
Please refer to page 24 of the User Guide which is included on the CD-ROM that shipped with your KVM...
1160   What is bank number referring to?
When daisy-chaining KVMs together each KVM switch is referred to as a bank, and the bank number help...
1158   Why would I need to reset my KVM?
You would need to reset the KVM to clear all programmed station names or for other diagnostic purpos...
1156   How would I reset the TK1602R?
The KVM Switch can be reset without disconnecting or powering down your computers either by (1) pres...
1154   What are console ports and what are they used for?
Console ports are used to connect your Keyboard, Video (Monitor), and Mouse for control over multipl...
1152   Where can I purchase compatible cables for my TK-1602R KVM switch?
KVM cables are available directly from TRENDnet here.
1150   How many cables come with the TK-1602R?
The TK-1602R doesn’t come with any KVM cables other than the included daisy-chain cable. This allow...
1148   What is a daisy-chain cable?
To add port capacity, multiple TK-802R/TK-1602R KVM Switches can be cascaded in a daisy-chain config...
1146   How long is the included daisy-chain cable?
The included daisy chain cable is 0.85 m/2.8 ft.
1144   What is an OSD?
OSD (On Screen Display) is a menu that is superimposed on your screen. On the OSD Menu, you will hav...
954   If your mouse is not responding, not detected or there is a mouse error check the following:
Make sure that your mouse is properly connected to the computer and to the KVM switch. Chec...
953   If your keyboard is not responding, not detected, or you receive a keyboard error, please check the following:
Make sure that your keyboard is properly connected to the computer and to the KVM switch....
952   What is the default password for the TK-801R, TK-802R, TK-1601R and TK-1602R?
The default password is eight zeros, “00000000”.
951   How do I get my mouse to respond after switching from one computer to another?
Press Scroll lock + Scroll Lock + End to reset the switch and it should start responding again. I...
950   Can I turn off the ‘beep’ when switching from one computer to another?
Unfortunately, you can not turn it off when switching from one PC to another. You can turn it off w...
949   What are the hotkey commands for the TRENDnet KVM switch?
The User’s Guide or Quick Install Guide has a complete list of hotkey commands. You can download ...
948   What is the hotkey command to switch from one computer to another?
Scroll lock + Scroll lock + Up or Down arrows. For a complete list of hotkey commands please consul...
947   Does my KVM switch support DVI monitors?
Only the TK-404KR and TK-204KR support DVI connections.
946   What kinds of mice and keyboards are supported?
On the TK-207K the console ports are USB and support standard USB mice and keyboards. All other T...
270   How do I switch from one computer to another with the KVM switch?
You can switch PCs by pressing the Push button on the KVM switch or by using the Hot-Key commands.
268   Will the KVM switch restore the keyboard settings when switching between computers?
Yes, the KVM switch will restore the keyboard settings between computers such as Cap lock, Num key, ...
266   Can I connect and disconnect the PS/2 cables while the computers are turned on?
Yes, you can connect or disconnect the PS/2 cables while the computers are turned on because the KVM...
264   Do I need to use the included external AC adapter?
The TK-802R or TK-1602R requires a power adapter/supply for the OSD to function. It is recommended t...
Home | Company | Products | Where to Buy | News & Info | Support | Downloads | Partners | Store | TRENDnetTV
© Copyright 2013 TRENDnet. All Rights Reserved. Contact Us | Privacy Policy   Connect: Facebook Twitter You Tube
Share