LAN Interface Setup
This page is used to configure the IP address parameters of the wireless access point for the local area network, which connects to the Ethernet port of your wireless access point. Please make sure that the IP address assigned to the wireless access point is available and is not being used by any other device connected to the local area network.
IP Address:
Subnet Mask:
Default Gateway:
DHCP:
Disabled
Client
DHCP Client Range:
-
Static DHCP:
Disabled
Enabled
DNS Server:
Domain Name:
802.1d Spanning Tree:
Disabled
Enabled
Clone MAC Address:
Wireless Client Mode only and enable Clone MAC Address under Wireless > Basic Settings