Maintenance Help

Reboot

Reboot

Restarts the router with current setting or default setting. Reboot Restarts the router for the settings to take effect. Reset Restarts the router with factory default setting.

Firmware Upgrade

The Firmware Upgrade section can be used to upgrade to the latest firmware code to improve functionality and performance. To update the firmware, follow these steps: Click the Browse button to locate the upgrade file on your computer. Once you have found the file to be used, click the Upload button below to start the firmware update process. This can take a minute or more. Wait for the router to reboot. This can take another minute or more. Note: Some firmware updates reset the configuration options to the factory defaults. Before performing an update, be sure to save the current configuration.

Backup/Restore

Save your configurations in a file on your computer so that it may be accessed again later if your current settings are changed. Be sure to save the configuration before performing a firmware update.

Admin

This page is used to set a password for access to the Web-based management. It is highly recommended that you change the default password to keep your new router secure.

Time and Date

This page can be used to configure the internal clock of the router. You can also configure the time zone and time server. System Time Display the current time of the router. if the time is incorrect, please fill out the correct time. Server You can fill the address used for clock synchronization of network time server. Time Zone You can select your time zone drop-down box. NTP Start You can click Get GMT Time from network time server.