Access Control
  On this page you can enable Access Control. If enabled, only the MAC addresses entered into the 'MAC address' boxes are allowed to associate to this AP. Note that you can cut and paste the addresses from the 'Station List' page into the MAC address boxes. Any new settings will not take effect until the device is rebooted.
 
 
 
 
Enable access control (Check this box to enable access control.)
MAC address 1
MAC address 2
MAC address 3
MAC address 4
MAC address 5
MAC address 6
MAC address 7
MAC address 8
MAC address 9
MAC address 10
MAC address 11
MAC address 12
MAC address 13
MAC address 14
MAC address 15
MAC address 16